• About Us
  • Certs
  • Events & Updates
  • Contact

SG赛车网页计划

ITCO ChemBlend

SG赛车直播

SG赛车开奖结果时间

Blends and mixtures of chemicals such as catalysts, surfactants, de-oilers and emulsifiers are critical to the upstream processing of oil and natural gas where these blends help boost productivity. As reserves become harder to extract, the oil and gas industry requires specialty chemicals and chemical blends to help recover the reserves.

Integrated Chemical Specialties, a division of ITS USA provides a line of signature blends under the brand ITCO ChemBlend™, for use during upstream, midstream and downstream processes in crude oil and natural gas production.

SG赛车软件

ITCO ChemBlend™ LI-10 Para Toluene Sulphonic Acid is a corrosion catalyst and a very strong acid in crystalline form. It is manufactured by sulfonation of toluene. It is especially suitable for organic reactions where an inorganic acid could cause oxidation. It is used as an esterification catalyst for plasticizers production; as an additive in food packaging adhesives; as a catalyst in pharmaceutical industry.

Listed below are common applications for ITCO ChemBlend - LI-10

Industry Application
Plastics Catalyst
Pharma Catalyst
Synonyms 4-Methylbenzenesulfonic acid; 4-toluenesulfonic acid ; P-TSA ; PTSA; Tosic acid; Tosylic acid; TsOH (Monohydrate)
EINECS No. 203-180-0
Molecular Formula C7H8SO3S.H2O
Molecular Weight 190.22
Specifications
Test Parameter Unit Specification
Appearance* - White crystalline powder
Assay on Monohydrate basis % Min 98
P-isomer content in the active Material by HPLC method % Min 92
P-isomer content in the active Material by others - Balance
Free Sulphuric Acid % Max 0.3
Iron Content ppm Max 10.0
Total Moisture % Max 11.5
Melting Point °C Min 99
Solubility in water - 100% soluble, clear solution

*Note: The international specification of p-Toluene Sulphonic Acid is white to off white to pink, though the material supplied would be white. However, as the product is highly hygroscopic - due to heat, sunlight and moisture the colour may change from white to off white or pinkish in the course of time

Applications
  • It is most useful as acid-catalyst reaction such as esterification / condensation / acetylation / polymerization /alkylation’s / hydrolysis / dehydration. As a hardening agent of furan resin which is applied in foundry Industry (Sadn Casting).
  • In Plasticizers industries mainly for DEP/ DOP/ DBP – As esterification catalyst. It is also used as curing agent for many resin systems such as mino / phenolic / acrylic resins/resoles / epoxies / amino-Plastics and furniture lacquers.
  • As an anti-stress additive for electroplating baths additive, plastics, coatings, dyes, pharmaceutical intermediates, hydrotrope, coupling agent and as a wetting agent.
  • Also applicable for use in food packaging adhesives.
  • As intermediate of dye chemistry
  • In Butyl Acrylate manufacturing – As catalyst
  • In Pharmaceutical industries – As catalyst
Packaging 25 Kgs HDPE Bags
Storage Store in a properly labelled and closed container. Keep in a cool, dry and well-ventilated place.

SG赛车开奖软件下载

ITCO ChemBlend™ - GRADE I Lithium Hydroxide Monohydrate is an inorganic alkali compound in the form of white crystalline salts. It is soluble in water and lightly soluble in ethanol.

It is available for industrial use in anhydrous form and as monohydrate (LiOH H2O).

Lithium Hydroxide is used as a base catalyst; a carbon dioxide scrubbing agent as is readily binds to CO2; breathing gas purification system for anywhere air is recycled (submarines and spaceships for example).

It is also used in ceramics and cement formulations, as well as to control corrosion by alkalizing reactor coolant in pressurized water reactors.

Integrated Chemical Specialties, a division of Integrated Traffic Systems USA provides three grades of Lithium Hydroxide for industry use:
• Lithium Hydroxide Monohydrate, Grade I
• Lithium Hydroxide Monohydrate, Grade II
• Lithium Hydroxide Monohydrate, Technical Grade

Listed below are common applications for ITCO ChemBlend - GRADE I

Industry Application
Oil and Gas CO2 Scavenger in liquid or gas substrate
Construction Additive to cement formulations

SG赛车官网开奖

Synonyms • Lithium Hydroxide
• Lithium Hydroxide Hydrate
• Lithium Hydrate
EINECS No. 215-813-4
Molecular Formula LiOH.H20
Molecular Weight 41.96
Grade Industrial Grade
Specifications
Test Parameter Unit Specification
Appearance - White Crystalline powder
LiOH Weight % Min 56.5
CO2 Weight % Max 0.35
Cl2 Weight % Max 0.003
SO4 Weight % Max 0.05
CaO Weight % Max 0.03
Fe2O3 Weight % Max 0.003
NaOH Weight % Max 0.05
Acid Insolubles Weight % Max 0.005

SG赛车人工计划软件

Synonyms • Lithium Hydroxide
• Lithium Hydroxide Hydrate
• Lithium Hydrate
EINECS No. 215-813-4
Molecular Formula LiOH.H20
Molecular Weight 41.96
Grade Industrial Grade
Specifications
Test Parameter Unit Specification
Appearance - White Crystalline powder
LiOH Weight % Min 56.5
CO2 Weight % Max 0.35
Cl2 Weight % Max 0.005
SO4 Weight % Max 0.03
CaO Weight % Max 0.03
Fe2O3 Weight % Max 0.0015
Na Weight % Max 0.03
Potassium Weight % Max 0.01
Acid Insolubles Weight % Max 0.008

SG赛车最新开奖结果

Synonyms • Lithium Hydroxide
• Lithium Hydroxide Hydrate
• Lithium Hydrate
EINECS No. 215-813-4
Molecular Formula LiOH.H20
Molecular Weight 41.96
Grade Technical Grade
Specifications
Test Parameter Unit Specification
Appearance - White Crystalline powder
LiOH Weight % Min 56.5
CO2 Weight % Max 0.35
Cl2 Weight % Max 0.003
SO4 Weight % Max 0.05
CaO Weight % Max 0.03
Fe2O3 Weight % Max 0.003
NaOH Weight % Max 0.05
Acid Insolubles Weight % Max 0.005
Other Data
Test Parameter Unit Specification
Bulk Density    
Loose g/cm3 0.9
Loose g/cm3 1.0
Physical Properties
Molecular Weight - 41.96
Density@20°C g/cm3 1.51
Standard heat formation Kcal/mole -188.9
Standard heat of fusion Kcal/mole -0.867
Specific heat @ 25°C Cal/g/°C 0.453
Loses water of hydration °C 100 - 110
Water Solubility
Temperature(°C)   LiOH in Saturated Solution*
0 Weight % 10.7
20 Weight % 10.09
100 Weight % 14.8

Note*: The solid phase in equilibrium with saturated solution is the monohydrate, LiOH.H20

SG赛车一码两期计划

ITCO ChemBlend™ - AMPS 2-Acrylamido-2-methylpropane sulfonic acid is a white granuler substance. It is a copolymer of 2-acrylamido-2methyl propane sulfonate and acrylamide and it is designed specifically for high-temperature and high-salinity water-based mud applications.

Due to its highly reactive hydrophilic properties and stability at high temperatures AMPS use has expanded into other industries such as water treatment to inhibit scale formation, and construction where it is used to improve strength and durability of concrete.

AMPS is also used as a fluid loss control additive for high salinity and high temperature filtration of water-based muds.

In addition, it can be used as a scale inhibitor, friction reducer, in polymer flooding applications and it inhibits precipitation of mineral salts.

Integrated Chemical Specialties, a division of Integrated Traffic Systems USA, provides AMPS for use in industry and for the applications listed here.

Industry Application
Oil, Gas and Petrochemical AMPS Inhibits fluid loss in high-temp, high-salinity drilling operations; scale inhibitors; friction reducers; water control polymers
Water Treatment Inhibit mineral scale and buildup in cooling towers and boilers, as well as help with corrosion control; they can also be used to precipitate solids in industrial waste water
Cosmetics Used in lotion and skin lubricant formulations
Cleaning Janitorial Additive to enhance performance of detergents and surfactants
Coatings Additive to improve thermal and mechanical properties, and to reduce amount of surfactants leaching out of paint and film
Construction Used to reduce water in concrete formulations which improves strength, workability and durability of concrete mixtures
Synonyms ATBS; 2-Acrylamido-2-methyl-1-propane sulfonic acid; AMPS; Acrylamido tertiary butyl sulphonic acid
EINECS No. 239-268-0
Molecular Formula C7H13NO4S
Molecular Weight 207.25
Grade 2401
Specifications
Test Parameter Unit Specification
Appearance - White Granules
Non-Volatile component % Min 99.0
Moisture % Max 0.3
Colour (25% Aq. solution) APHA Max 100
Iron Content ppm Max 5
Applications • Water treatment chemicals;
• Emulsions for paint,
• Paper coatings and adhesives
• Textile auxiliaries
• Acrylic fiber
• Detergents and cleaners
• Oil field and mining chemicals
• Construction chemicals
• Medical hydrogel
Packaging 25 Kgs HDPE Bags
Storage Store in a properly labelled and closed container. Keep in a cool, dry and well-ventilated place.

SG赛车五码计划两期

ITCO ChemBlend™ - Na – ATBS 2-Acrylamido-2-methyl-1-propane sulfonic acid is a colorless to a light-yellow transparent liquid surfactant that is highly hydrophilic, super absorbent and a good sealing agent. It is used in the production of latex as it increases mechanical stability and adds to smoother emulsions with higher quality characteristics such as tolerance to scrubbing and smooth feel. ATBS.Na is also used in water treatment, oil and gas production, as an additive to cosmetic formulations and for paints and coatings production.

Integrated Chemical Specialties, a division of Integrated Traffic Systems USA, provides ATBS for use in industry and for the applications listed here.

Industry Application
Oil and Gas Surfactant
Paints and Coatings Additive/surfactant
Plastics Emulsifier in the production of latex
Water Treatment Additive
Synonyms NaATBS; AMPS Sodium Salt 50 %; ATBS-Sodium Salt 50%; Sodium salt of 2-Acrylamido 2-methylpropanesulfonic acid 50% aq. solution.
EINECS No. 225-948-4
Molecular Formula C7H13NO4S.Na
Molecular Weight 229.23
Grade 2405
Specifications
Test Parameter Unit Specification
Appearance - Clear colorless to light yellow liquid
Water Weight % 48 - 52
Density @ 25°C (77° F) Kg / Liter 1.20 -1.21
Viscosity @ 25°C (77° F) cps Max 14.0
pH @ 25°C (77° F) - Max 8.0
APHA @ 25°C (77° F) APHA Max 90
Iron ppm Max 2
Inhibitor (MMEHQ) ppm 65 - 90
Refractive Index (RI) at 25 °C - 1.419-1.424
ATBS Sodium content (Monomer) % 48.0 – 52.0
Applications • Water treatment chemicals
• Emulsions for paint, paper coatings and adhesives
• Textile auxiliaries
• Acrylic fiber
• Detergents and cleaners
• Oil field and mining chemicals
• Construction chemicals
• Medical hydrogel
Packaging 950 Kgs IBC
Storage Store in a properly labelled and closed container. Keep in a cool, dry and well-ventilated place

SG赛车现场开奖直播

ITCO ChemBlend™ – NTOa N-tertiary Octylacrylamide is a high molecular weight polymer made up of carbon, hydrogen, oxygen and nitrogen repeating monomer units.

N-tertiary Octylacrylamide increases the viscosity of the water sludge that precedes the final water injection during the hydraulic fracking process.

N-tertiary Octylacrylamide is frequently used as mobility-control buffer in flooding operations.

Integrated Chemical Specialties, a division of Integrated Traffic Systems USA, provides common applications for ITCO ChemBlend – NTOa listed here.

Industry Application
Oil and Gas Enhanced Oil Recovery (EOR), Antiscalant
Adhesives Additive
Cosmetics Additive
Synonyms Tertiary-Octyl Acrylamide, N-Tert-Octylacrylamide, 2- Propenamide,N-(1,1,3,3-tetramethylbutyl)-Acrylamide, N-(1,1,3,3-tetramethylbutyl)- Acrylamide; n-TOA
EINECS No. 4223-03-4
Molecular Formula C11H21NO
Molecular Weight 183.29
Specifications
Test Parameter Unit Specification
Appearance - White powder
Assay (GC) % Min 99
Turbidity NTU Max 5
Sulphate ppm Max 850
Melting Point °C 63.5
Applications • Personal Care
• Adhesives
• Antiscalants
• Enhanced Oil Recovery (EOR)

Integrated Chemical Specialties, a division of ITS USA strives to provide our clients with the highest quality, competitively priced product with exceptional customer service and experienced logistical support.

SG赛车开奖结走势图


SG赛车开奖走势

Disclaimer: The information above is believed to be accurate and represents the best information currently available to us. There are no warranties which extended beyond the information in the TDS. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA warrants this product to conform to its own specifications. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA liability on this warranty is limited to the return of the purchase price of this product. The buyer assumes all risks and liability resulting from the use of this product. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA neither assumes nor authorizes any person to assume for it any other liability in connection with the sale or use of this product. We make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall Integrated Chemical Specialties, a division of Integrated Traffic Systems USA will be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Integrated Chemical Specialties, a division of Integrated Traffic Systems USA has been advised of the possibility of such damages. Request a SDS if needed. Note: Products protected by valid patents are not offered for sale in countries, where the sale of such products constitutes a patent infringement. The Liability for patent infringement is exclusively to be understood as buyer’s risk. Products currently covered by valid US Patents are offered for R&D use in accordance with 35 USC 271(e)+A13(1)

5850 San Felipe St., 5th Floor, Houston TX 77057 | United States | 713-337-0152 | Privacy Policy | Terms and Conditions
澳洲幸运5投注平台 澳洲10开奖结果计划 澳洲8最快开奖结果 秒速赛车几点开始 澳洲幸运5开奖号码 澳洲5开奖直播视频 澳洲8怎么玩的